Aller au contenu principal

Corroded battery flash no longer operates

I have 2 nikon flash units. SB 600 and SB 800

Both sat for 3 years and the batteries corroded. I cleaned the battery cntacts and the SB 80 will turn on but will not fire. The 600 is a paperweight. I have not cleaned internally. Is there a tek?

Une réponse ! View the answer J'ai le même problème

Cette question est-elle utile ?

Score 2
Ajouter un commentaire

Fix Kits pour batteries d'iPhone

Seulement $29.99

Buy Now

Fix Kits pour batteries d'iPhone

Seulement $29.99

Buy Now

1 réponse

Solution retenue

@ericofmemphis, Eric, May need a good quality set of new batteries. Try this to clean the contacts on your flash one more time to ensure good contact. The best commonly available thing to clean the camera battery corroded contacts with is distilled vinegar and Q tip/cloth/small brush then very light polish with extra fine steel wool or an ink eraser on a pen, followed by a little 90% isopropyl alcohol on a clean cloth. Then dry the contacts with a dry clean cloth. You want to avoid using a cloth that will leave lint/dust behind. Finish by blowing out with a can of compressed air to get rid of any fibers or grit from polishing. Check the attached links dismantling and cleaning, instruction and guides, Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

https://www.manualslib.com/manual/989223...

http://photorojo.blogspot.ca/2009/05/diy...

https://www.youtube.com/watch?v=SHbimNl7...

http://cleaning.lovetoknow.com/Clean_Alk...

https://www.youtube.com/watch?v=sDd4VkUm...

Cette réponse est utile ?

Score 3

Commentaires:

i got it repaired at mata electronics in bangalore pls mail at mataelectronics@Gmail.com for camera or flash service

par

Ajouter un commentaire

Ajoutez une réponse

Eric Swartz sera éternellement reconnaissant.
Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 27

30 derniers jours : 100

Total : 1,434