Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Model A1046 or A1095 / 1280x854 screen resolution

Questions au sujet de 164 Voir tout

how to restart a lazy mac

my powerbook g4 15"does not restart immediately after shut downs.

it does however restart after waiting 8-10 hours. strangely, if i disconnect the power after logging out, (without shutting off the unit) it restarts immediately. must point out that battery doesnt hold much charge anymore and the mac must be connected to the ps all the time. i wouldn't want to buy a new battery unless i am reasonably sure that it would solve the problem. have already changed to pram battery.

any suggestion ?

thanks and happy new year to all

francesco

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 1
Ajouter un commentaire

2 solutions

Solution retenue

Have you tried resetting the power manager? Instructions are here:

http://support.apple.com/kb/HT1431?viewl...

I would also zap the PRAM (though changing the PRAM battery would have effectively accomplished that) and reset the NVRAM, just for good measure.

Zap PRAM: reboot while holding down command, option, P, R. Keep holding them down through 3 chimes.

Reset NVRAM: reboot while holding down command, option, the letter O, and F (this boots you into Open Firmware, which only works on PPC Macs.) You'll get a white screen with black text. When the text stops spewing, type "reset-nvram" and Return. Then type "reset-all" and Return, whereupon the computer will reboot itself.

If that doesn't help, you may have a hardware problem of some kind.

Cette réponse a-t-elle été utile ?

Indice 3

Commentaires:

Thank you Dear Colleen, it was very helpful. Best Regards, Martin Svika at mejelgava@yahoo.com

par

Ajouter un commentaire

When you say my powerbook g4 15"does not restart immediately after shut downs.

it does however restart after waiting 8-10 hours.[/quote].

Sounds like warping of the logic board, and cooling resets the warp. You could try to shim the board, or look for solder joints that need reflowing.

If that's too much work then replace the unit it's long overdue.

Good Luck,

N.

Cette réponse a-t-elle été utile ?

Indice 1
Ajouter un commentaire

Ajouter une réponse

Francesco sera éternellement reconnaissant.
Afficher les statistiques:

Dernières 24 heures : 2

7 derniers jours : 16

30 derniers jours : 76

Total : 9,942