With the gear shift indicator/odometer staying on all the time, this causes a parasitic draw. Is there a relay that controls this function or would it be in the circuit board?
Cette question est-elle utile ?
Rep: 101,3k
8
173
358
kenwhitlock1 , Check under hood for wire harness excessively wet or corroded around connections and fuse box. If all looks good, from a lot of forums I checked, it could be a problem with the (GEM) Generic Electronic Module. Locate the GEM (link #1) and check it for excess moisture/corrosion/connection also. Test can be ran by a good Technician to check circuits going to GEM to see if it is bad. Link #2 mentions a TSB on a like problem also.Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
Cette réponse est-elle utile ?
Thank you very much for your response. Not only the response but the supporting documentation and video. You've been very helpful.
kenwhitlock1, Your welcome. Thanks for replying back and have a good day..
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 4
Total : 3,287
