iPhone not charging, "this accessory may not be supported."

Question

iPhone 6

Sorti le 19 septembre 2014, cet iPhone avec un écran de 4,7 pouces est une version plus petite de l'iPhone 6 Plus. Identifiables par les numéros de modèle A1549, A1586, et A1589.

4994 questions Voir tout

anthonriis @anthonriis

Rep: 13

2

1

Publié: 21 févr. 2017

Options

iPhone not charging, "this accessory may not be supported."

I have this iphone 6 motherboard that works almost fine, exept it wan't recognise the charging cable, and the message pops up: "This accessory may not be supported".

I have tried "millions" of different cabels, originals too, but it dosn't work.

I can charge it by turning the phone of while it is plugged in, but that is no good...

I have tried with diferent ports too, dosn't make a difference.

I have tried updating/restorering the phone, didn't help.

Could it be fixed by jailbreaking the phone and mabye run it on an older ios?

Could it be the charging chip (U2)?

Thanks for your help :)

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice 1

Ajouter un commentaire

2 Réponses

Elijah @elijahsrook001 Rep: 217 9 4 2 · Answer 1 · 2017-02-21T15:26:46-07:00

Réponse la plus utile

Elijah @elijahsrook001

Rep: 217

9

4

2

Publié: 21 févr. 2017

Options

one thing that may cause your iPhone to reject your charging cable is that your charging socket/hole/connector may be full of dirt, like lint, or dust. a good way to clean this out is with a toothpick, carefully. alternate scraping the dirt out and blowing in the charger port to loosen the dirt. dirt in the charger hole may cause a poor connection, including the error message

Cette réponse est-elle utile ?

Oui Non

Indice 1

1 commentaire:

I tried conecting a completly new socket to the motherboard, didn't help.

The problem must be software related or some hardware failure on the motherboard

21 févr. 2017 par anthonriis

Ajouter un commentaire