Aller au contenu principal

Bluetooth on-ear headphones with 40 mm drivers and a 610 mAh battery. Released in 2014.

21 questions Voir tout

The Left side of my headphone is not working

Hello,

The left side of my headphone is not working now. I charged it fully but no use. I tried connecting it with the cable but still no use. I've no idea what to do as it's out of warranty and JBL is telling me to pay 75% of the MRP. Any solution guys?

Appreciate your assistance

Regards,

Josh

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 8
4 commentaires

@joshanjoy check this viudeo https://www.youtube.com/watch?v=1CMVoqfh... for a teardown to see how to get into your headphone.

par

I also have the same problem and I must still fly for 18 hours from London to Cape Town tomorrow. This really sucks!

par

My JBL bluetooth headphones were not working on the left side too. They were surprisingly easy to fix. Just like in this video: https://youtu.be/iTHJBDAdRos

par

Thanks for the reply @solderfix

I but a new headphone now :P

par

Ajouter un commentaire

3 Réponses

Réponse la plus utile

Left side,

  1. you remove the padding
  2. you remove 4 screw
  3. you use a very small screwdriver to pry the pivot point to be able to gently slide the speaker off.
  4. you will see that the speaker wires for the left speakers are no more soldered.

#

Block Image

  1. pull them a little bit to have more room to work
  2. use a soldering iron to fix them back respecting the positive/negative connection(red+/black-)

#

Block Image

Voila! Worked for me.

Sorry for bad english

Cette réponse est-elle utile ?

Indice 6

1 commentaire:

hello! I'v checked it all trough, there's not a single wire disconnected.

par

Ajouter un commentaire

Hello....I have a problem

I use JBL headphones.

I accidentally pulled the wire really fast and then I couldn't see the earphones mark anymore

I can hear from the phone and one side of the earphones at the same time.

The wire also have a strange curvy spot....I think something is broken

(Sorry for bad English)

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

@joshanjoy there is a crossover cable from one driver (speaker) to the other, check that out. Use a multimeter and check for continuity. Also check the solder connections on the driver (speaker) make sure the cable is still soldered on.

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

I'll check

Thanks for your reply @oldturkey03

:)

par

Ajouter un commentaire

Ajouter une réponse

Joshan Joy sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 11

30 derniers jours : 25

Total : 50,791