Aller au contenu principal

Repair guides and support for full size headphones that encompass the entire ear, also known as circumaural headphones.

108 questions Voir tout

Audio Static exposed wire.

I have a 6 year old set or urbanear headphones and I get an unacceptable amount of static when I use them. I opened one side of the speaker and I can see that there are two wires going to the speaker itself. One has insulation and the other does not. If the uninsulated wire touched the contact (solder point) of the insulated wire could this be a cause for the static I'm hearing? I have a picture below, I hope that can clear up any confusion, I'm not very experienced in repair, I apologize if I have used wrong terminology.

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

I love urbanears! great headphones. Okay, so the static sound you might be hearing could be the wires not being protected from electrostatic, which is common with electric guitar pickups having a "buzzy" sound when played. I recommend wrapping the exposed wire with electrostatic shielding. Link:[http://| https://www.amazon.com/Copper-Tape-Shiel...] . That might do it.

-Toby

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Jak Davidson sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 5

Total : 206