Réparez vos affaires Communauté Boutique

Tutoriels de réparation et assistance pour votre téléviseur LG.

1344 questions Voir tout

Options

How do I remove back cover on LG TV 55UB8500

I removed all the screws from the back cover yet it seems to still have resistance. Do not want to cause any damage while removing it and want to confirm how I should apply pressure to remove it correctly.

There's no place to properly pull without being concerned on causing damage to back cover. The only place that I can actually grab is by the HDMI ports and I'm concerned that will crack if I pull to firmly.

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 4
1 commentaire

Did u ever figure this Out? Having same issue driving me nuts

par

Ajouter un commentaire

3 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

Hi Steven, are all of the screws from around the perimeter removed? I cannot tell for sure but from the picture you posted it looks like there might be a screw still present in the upper right.

Cette réponse est-elle utile ?

Oui Non
Indice 2

13 commentaires:

All of he screws are removed. I spoke to a tech at a repair shop...apparently they use a strong tape that helps the back and the frame adhere to each other. I cannot get anything to go between the two (w/o) causing damage...to make the back start separating. They say they have a plastic tool that they use to help pry them apart. I really do not want to have to pay $50 to just get the two apart....but may have to :-(

par

We sell plastic prying tools for much less that should help safely separate the two.

https://www.ifixit.com/Store/Tools/all?f...

A spudger and plastic card should be all you need.

par

It looks like a lock ? in the back

par

There are 4 silver screws at the base of the TV, mine came apart no bother

par

Once screws are out the back cover(if it has screws),they usually snap together so basicly I find the best place so separate by finding an area around the side where I can lift a little,then I go around the sides prizing with a long screwdriver,

par

Voir 8 commentaires en plus

Ajouter un commentaire

Options

Hello guys, I’ve finally opened my tv. There was no adhesive tape. There are 5 massive brackets on each side of the TV, there’s no easy way other than prying the plastic open. See my photos below

Block Image

Block Image

Block Image

Block Image

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Options

As shown here https://www.scribd.com/document/42272710... there are two notches on the bottom of the screen - this is where you can open by inserting long nosed pliers in a closed state and then opening up. There will be a huge cracking sound but nothing breaks.

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

Mine definitely broke when I finally got it open I had a crack on my display screen when I turned it back on. Just from the force I had to use to pry the tv open

par

Ajouter un commentaire

Ajouter une réponse

Steven Weinberg sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 7

7 derniers jours : 25

30 derniers jours : 108

Total : 44,431