Réparez vos affaires Communauté Boutique

Sorti le 25 septembre 2015. Modèle A1687/A1634. La réparation de ce modèle est similaire à celle des versions précédentes et nécessite tournevis et outils pour faire levier. Disponible en GSM et CDMA / 16, 64 ou 128 Go / Argent, Or, Gris sidéral ou Or rosé.

1041 questions Voir tout

Options

What does this part function as on a 6s plus front facing camera?

https://imgur.com/a/YIEIV

Today while I was doing a 6s plus repair I broke this little square off of the front-facing camera. (Image above) I am curious what it functions as.

I assumed it was the proximity sensor so when the customer puts their phone to their ear it will no longer be a black screen.

This was my first time breaking that off after several repairs. I guess it was a tad stuck in there. Also, what are some methods you use to prevent this from happening?

Thanks.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Yes, that's the proximity sensor and it does stick in that plastic casing at times. When it looks like it's going to be stuck, I often try to pry the entire plastic housing up off the screen rather than try to pry the proximity sensor out of the plastic housing. Otherwise, work it out of the housing by prying all around instead of one spot or by not pulling it out by the cable itself.

Cette réponse est-elle utile ?

Oui Non
Indice 1

1 commentaire:

Thanks Greg. So the only issue the customer should have is his screen not going black when his ear is put to it?

I tested the microphone and it worked so I just decided to continue with the repair.

I think next time I'm having trouble I'll try and stick something in there and pry the plastic up like you said. Thanks

par

Ajouter un commentaire
Réponse la plus utile

Options

I always use a bit of heat when removing the camera flex components and the home button assemblies off of all iphone screen replacements.

Not alot...80 - 90 C for a 10 to 15 seconds softens the adhesive without damaging any of the components and never had any issues getting anything apart.

Cette réponse est-elle utile ?

Oui Non
Indice 2

1 commentaire:

I actually have never used heat for a screen repair. Home buttons are always super easy to get out so I've never worried about heating that up.

As far as the camera I could see using a bit of heat to help get the sensor out easier. I actually did that repair in a library so it was a bit out of the question... haha

par

Ajouter un commentaire

Ajouter une réponse

Ian Romprey sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 1

Total : 68