Aller au contenu principal

La deuxième génération de l'iPad avec les modèles Wi-Fi, GSM et CDMA. Certains modèles ont été rafraîchis avant l'iPad 3. La réparation est difficile, nécessitant de chauffer les parties collées, ainsi que de la précision et de la concentration afin de judicieusement détacher les différents composants.

732 questions Voir tout

Top and bottom of newly installed screen/digitizer not working

Installed new screen/digitizer and the top and bottom 1 to 1.5 inches of the screen is non-responsive. Only very small sections of the original screen were responsive since it was very damaged. Was wondering the likely hood that the reason that it is not working correctly is a defective digitizer or is the controller bad. Any way to test these components to determine next course of action.

Thanks,

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Solution retenue

Unfortunately, the only way to know for sure is to use known-good parts. New, replacement parts are as close to this ideal as you will get as a DIY fixer. So yes, it could be a bad digitizer, damaged connectors or Touch controller issues on the logic board.

Start by carefully inspecting the connectors on the logic board and the surrounding area for any damage, or missing components. Also inspect the condition of the flex cable from the digitizer. If nothing is visually amiss, I would recommend you contact the vendor who sold you the digitizer and see what you're options are.

A quick visit to a local repair shop could also help; have them test a digitizer to see if you can isolate the issue.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

Ajouter une réponse

David Boudreaux sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 70