Réparez vos affaires Communauté Boutique

Device and repair information for the 60" LED HD TV by Samsung released in 2013, model number UN60FH6003FXZA.

203 questions Voir tout

Options

UN65EH6000FXZA YH02 strobe backlights

Block Image

Block Image

Block Image

UN65EH6000FXZA YH02

I have a Samsung UN65EH6000FXZA YH02. The backlights strobe I get no sound no standby light or noise. I have replaced the main power board and get the same thing. When I disconnect the control and tcon board and just have thebacklights connected I get the strobing backlights still. But when I disconnect the back light and just have the control and tcon board connected to the board I get the standby light and it makes the start up noise. Do anybody have an i dea what is causing this and the part number i would need to fix it?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

jaded past "When I disconnect the control and tcon board and just have thebacklights connected I get the strobing backlights still." sounds like a failed backlight array or a bad power board. Post some images of all of your boards so that we can see what you see. Use this guide Ajout d'images à une question existante for that. You can measure the voltage on the led connector to see if the "strobe" originates there. If not then you know it is most likely the array.

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

How would I measure the voltage I honestly have never done that before. Tv powered on or off? Give me the steps and I can get it done and post my results. And again that is a brand new power board.

par

Ajouter un commentaire

Ajouter une réponse

jaded past sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 205