Have tried all suggested cures for this fault, battery out card out etc , have changed cards , batteries. Camera has had very little use ,was purchased to attach to telescope,
has probably taken less than 100 shots
Cette question est-elle utile ?
Rep: 43
2
1
Hi David, I had the same problem on a Canon Rebel T3i.
Here is the solution I found for my camera:
as you all well know, the shutter is made by 2 separate sets of curtains. When pressing the button one set would freely move while the other set would get stock triggering error 70 . I send my Camera for service to a local Camera shop who repaired it, replacing the shutter blades, for less than $ 200.00. I got my Camera back and it works like brand new again.
Cette réponse est-elle utile ?
Hi I bought a used camera off EBAY with a low shutter count for about £146 ,but thanks Paolo for the answer as I still have the old body which was used very little ,it was attached to my telescope
Dernières 24 heures : 1
7 derniers jours : 6
30 derniers jours : 15
Total : 2,427
