Aller au contenu principal

The DualShock 4 CUH-ZCT2 was announced in 2016 to replace the CUH-ZCT1 controller released in 2013. This controller is similar to the previous model.

266 questions Voir tout

Will the JDS-040 fit on my ps4 controller when mine has JDS-050?

My Controller model is CUH-ZCT2U and the model of the port is JDS-050 so i wanted to make sure before i bought anything that might not fit, and if i do need JDS-050, where could i find one ive looked everywhere but i cant find it.

JDS-050:

Block Image

Block Image

JDS-040:

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 2
Ajouter un commentaire

2 Réponses

Réponse la plus utile

I am in the same boat, need a jds-050 usb board and all I can find is the jds-040 board.. I'm gonna just order that one, the pin connectors are the same and had seen a wire diagram where they match the same, I am thinking the jds-050 was either an upgraded board or maybe a differnt manufacturer.

Cette réponse est-elle utile ?

Indice 1

3 commentaires:

Same problem. Already tried a jds-040 board. It is not compatible.

par

so either buy a new controller or wait till they release the jds-050 to consumers

par

I have a CUH-ZCT2U (5th gen) and my controller has a JDS-055 board. My controller works when connected to USB but will not charge. I bought a JDS-040 board by mistake. The JDS-040 can be installed in the controller but the ribbon connector is on the other side and requires the ribbon cable be twisted to make it work. The JDS-040 does allow the controller to work over USB and the lights work but still not charging.

par

Ajouter un commentaire

Kindly check Alibaba. They have tons of replacement parts for JDS-050 and all other port versions.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

BurnedSpaghetti sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 8

30 derniers jours : 82

Total : 6,246