Aller au contenu principal

Infos et tutoriels pour réparer l'iPhone 8, sorti le 22 septembre 2017, modèles A1863, A1905.

873 questions Voir tout

Help identify iPhone 8 logic board components

I have an iPhone 8 that will not come on I’ve identified one of the components close to the battery port connector (RV3C002UN) but am having trouble identifying another component to its immediate left. A mirror/silver like chip was actually broken and without a schematic it is very difficult to identify. If anyone could possibly help it would be greatly appreciated.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
2 commentaires

@blaked89 you can make this "the components close to the battery port connector"and "A mirror/silver like chip " a lot easire by posting a picture with the broken component marked. that way people like @refectio can probalby identify this in no time at all. Use this guide Ajout d'images à une question existante to post some images.

par

Ok thanks, until recently I only read posts but I finally found an issue I could not find myself so I just had put the question out. So first post here. I could upload a picture tomorrow if the pads on the board but the component itself was more or less shattered. The schematic from Minho seems to be the one I’m looking for But I will certainly let everyone know once I find out. I didn’t read his post till after our shops close.

par

Ajouter un commentaire

1 Réponse

Solution retenue

In general, a shiny glass component is usually a diode or a MOSFET. Check the screen capture of the iPhone 8 Plus schematic below. There is very little difference between regular and plus models on the basic circuitry.

Block Image

Cette réponse est-elle utile ?

Indice 2

3 commentaires:

Thanks, I really appreciate it. I’ll look into it as soon as possible and let you know if I can find it.

par

So i believe it is a TVS but I dont want to post the number/name of the component until I am %100 sure that’s the component that was damaged. Customer is becoming anxious, not sure if I will still have the phone by the time the part comes in. Very fine time limit I am working with lol

Thank you so much for the information and schematic but I do not want to mislead anyone. Will have to update you when it is confirmed. I do apologize.

par

Were you ever able to identify the name of that shiny glass component?

par

Ajouter un commentaire

Ajouter une réponse

Blaked89 sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 8

Total : 373