Réparez vos affaires Communauté Boutique

57 questions Voir tout

Options

Yellow blobs on nes board acidentially removed.

Hey guys! I recently bought a broken NES and replaced the 72 pin connector, and it worked great! until I removed what I thought was old soda from some pins near the RF chip, turns out I messed up, and my NES shows a monochrome screen for a split second, then goes to black while still playing audio. Does anyone know what the substance is so i can find a replacement and put it back on my board, Thanks!

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

That sounds like flux to me. It’s used in conjunction with solder in order to make the soldering process easier. But once soldering is finished, it serves no purpose for the circuit, and should be removable without affecting anything. I suspect your display issues may be related to something else entirely. You could try re-melting the solder on those suspected pins to make sure they have proper connection to the board, Or it could be an issue with the new 72-pin connector.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

Gigamac24 sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 67