wifi range very poor after disassembley

Question

iPhone 4

4ème génération de l'Apple iPhone. La réparation est relativement simple, mais la vitre avant et le LCD doivent être remplacés ensemble. GSM / capacité de 8, 16 ou 32 Go / Modèle A1332 / noir et blanc.

2396 questions Voir tout

Harry @harry11250

Rep: 13

1

Publié: 20 mai 2011

Options

wifi range very poor after disassembley

Basically i changed my iphone to a white one using one of the kits that are available on ebay, When i finished the install my iphone's wifi wouldn't pick up anything unless it's within 2Ms of the source of the wifi. After a while i took the iphone apart again as the light sensor wasn't working and when i put it back together the wifi was back to normal, I had to take it apart again to replace the home button as it got jammed and now i'm back to the same where the wifi range is extremley poor. What could be the problem?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice 1

Ajouter un commentaire

8 Réponses

Solution retenue

pollytintop @pollytintop

Rep: 77,1k

337

104

145

Publié: 21 mai 2011

Options

harry there are plenty of people in the same boat.. it would seem the culprit is a screw!

*The answer is one of the screws that screw the logic board to the metal body of the iPhone. In our case it is the one near the camera or the one below below the inner antenna connector, this is most probable but who knows). The screw grounds the board with the antenna!!*

Armald Imeraj, Dec 7 2010 @ 10:47 AM

wi-fi distance was reduced

Wifi very weak after display replacement

Wifi and GPS Problem

Cette réponse est-elle utile ?

Oui Non

Indice 4

1 commentaire:

do we know the exact screw?

21 mai 2011 par Harry

Ajouter un commentaire

Chavdar Sirakov @csirakov Rep: 1,9k 8 4 3 · Answer 1 · 2011-07-28T13:45:48-07:00

Chavdar Sirakov @csirakov

Rep: 1,9k

8

4

3

Publié: 28 juil. 2011

Options

Losing the metal clips marked in green is top reason for abnormal Wi-Fi operation after reassembly.

Here are two images, which I shot, that better depict the cause of the issue. Once you lose that piece, you have no option but to order a replacement cover.

In case they don't here, here's an external link.

Cette réponse est-elle utile ?

Oui Non

Indice 4

Ajouter un commentaire

Anthony Rose @anthonyrose Rep: 13 1 · Answer 2 · 2011-06-15T01:52:37-07:00

Anthony Rose @anthonyrose

Rep: 13

1

Publié: 15 juin 2011

Options

I run a company called fixmyiphone and we run into this problem sometimes after taking an iPhone 4 apart. This problem occurs when you touch the wifi cable next to the loud speaker unit (at the bottom of the iPhone). We have found the best way to fix this is to replace the wifi cable, this will sort all your wifi problems out.

Anthony

Cette réponse est-elle utile ?

Oui Non

Indice 1

Ajouter un commentaire