Aller au contenu principal

Repair and disassembly guides for the Nerf Elite Triad EX-3 released in 2013.

1 questions Voir tout

Dart not going all the way in

The darts will not sit all the way in the chamber. They will slide out about a 1/2 in, this not fire correctly

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

2 Réponses

Réponse la plus utile

nerf guns are picky about their ammo sometimes, that gun in particular is really picky, darts from HB or Walmart nock-offs have slightly different inner diameter then Nerfs….. also kids chewing on them doesnt help in my experience. . my kids will eat anything..

Cette réponse est-elle utile ?

Indice 1

1 commentaire:

I have the same problem. It is just one chamber, all the time. Doesn’t matter which darts (I’m only using the 3 Elite darts that came with the gun.... since it’s my child first one). The other two chambers always work and the third chamber always pops the darts out an inch. I’ll probably try to dissemble and see if I can figure out what’s going on

par

Ajouter un commentaire

So as its not going in fully i taped some paper to the dart shown in the below picture and it worked cause it was loose

Block Image

Block Image

Block Image

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Raymond Hylton sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 6

30 derniers jours : 13

Total : 670