Aller au contenu principal

Support and repair information for Marantz home theater AV receivers and older audio-only receivers.

47 questions Voir tout

Marantz SR-60 Receiver amplifier

Hi There,

I got a Marantz SR-60 tuner and amplifier that started to blow the 1.25 amp fuse on the power switch and supply board.

Is there a way of getting a board like this, the spec number on the board is:P904 yk058j1 52-2.

When you turn on the unit, it goes on pre-on then, if you turn the unit on and off a few times it just blows the fuse. Not sure it would be the mauve, the board or the fuse.

Would anyone have an idea of what's causing the problem.

Eddie

Thanks

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice -1
Ajouter un commentaire

1 Réponse

Solution retenue

It sounds like bad caps or a bad powersupply. Here is the service manul. Take a look and check it out. If you can not get a whole new logic board, all the components are listed, so you should have no trouble fixing it. Good Luck

Cette réponse est-elle utile ?

Indice 4

2 commentaires:

I have SR60 , with one channel intermittent disorted sound, what the cause ? can I have the service manual. thanks

par

you can contact me by email, my address is in my user profile. I may still have it....;-)

par

Ajouter un commentaire

Ajouter une réponse

Eddie sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 2,465