iPad Mini 4 - Screen/Digitizer not seating correctly.

Question

iPad mini 4 Wi-Fi

Guides pour la version Wi-Fi de l'iPad Mini 4-modèle A1538. Annoncé le 9 septembre 2015, l'iPad Mini 4 est le successeur de l'iPad Mini 3.

97 questions Voir tout

Jacob @militiatech

Rep: 11

Publié: 29 avr. 2019

Options

iPad Mini 4 - Screen/Digitizer not seating correctly.

Hey all, New to the forums and new to working on a iPad Mini 4 reassembly. We had to replace a digitizer that was cracked with a brand new one, my only issue with it is trying to close the whole thing back up. Currently the issue persists near the bottom right hand corner of the screen but it can be the top right hand corner as well (Its usually on the right hand side.) My Theory is that the cables that attach from the digitizer and the board are not wanting to seat correctly and keeping the screen popped up. Attached with this post is a image of said iPad Mini 4, any help would be appreciated.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice 0

Ajouter un commentaire

1 Réponse

Solution retenue

Gorilla @xingxing

Rep: 1,7k

7

6

Publié: 29 avr. 2019

Options

Your theory is on point - cable is not folding in the right direction causing screen not to sit flush, you may also want to remove old adhesive and use Tesa 61395 tape, this is currently the best adhesive for screen repair.

Tesa 61395 Tape

@refectio wrote a great guideline for iPad screen repair, check out his answer in this post:

After doing my repairs (battery and screen) I have problems

Produit

Tesa 61395 Tape

$5.99

Cette réponse est-elle utile ?

Oui Non

Indice 2

2 commentaires:

For the Digitizer cabel itself, besides making sure its folded right, is there any other way to secure it say with kapton tape or double sided tape to make sure it just stays in place?

29 avr. 2019 par Jacob

@militiatech I don't believe taping is necessary if cable is properly folded and seated (it's a flex cable after all). That said, secure it with kapton tape or double sided adhesive won't do any harm and will hep securing it to some extent.

29 avr. 2019 par Gorilla

Ajouter un commentaire

For the Digitizer cabel itself, besides making sure its folded right, is there any other way to secure it say with kapton tape or double sided tape to make sure it just stays in place? — Jacob
@militiatech I don't believe taping is necessary if cable is properly folded and seated (it's a flex cable after all). That said, secure it with kapton tape or double sided adhesive won't do any harm and will hep securing it to some extent. — Gorilla

iPad mini 4 Wi-Fi

iPad Mini 4 - Screen/Digitizer not seating correctly.

1 Réponse

Tesa 61395 Tape

Ajouter une réponse