Rep: 13
3
Hi,
Have an iPhone 8 which cant autofocus. I have tried the camera in another iPhone 8 and it works there. I have also tried several cameras in the iPhone 8.
It seems like its the close ups that that wont focus, but i cant say for sure.
Have anyone encountered this problem before? Would you know if there are any filters/ICs that controls the autofocus?
Thanks!
Cette question est-elle utile ?
Rep: 13
3
Found the issue, it back case had a faulty so the camera couldnt move freely. Added a little foam bumper around the camera. And it worked!
Cette réponse est-elle utile ?
Rep: 221,4k
15
289
807
There are no available schematics for the iPhone 8 so you will have to do some educated guesswork based on what info we do have for the 8 Plus. The iPhone 8 has only one connector for the rear camera whereas the 8 Plus has two (J3900 & J4000). The 8 Plus camera is more advanced so there are going to be features which are not present in the 8.
Ideally, if you have another iPhone 8 on hand, you could compare the diode mode measurements of the RCAM connector to see if anything stands out.
The iPhone 8 rear camera will have several power lines controlling it. Take a look at this snapshot of the 8 Plus to give you an idea of what could be in play.
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 1
Total : 1,035
4 commentaires
It seems like it was the new back housing that caused the problem, Very odd. Might be some problem with the magnets around the new camera holder. Anyway, all good now.
Thanks for your input Minho.
par Johan J
i got a problem too, i put a new camera in my iphone 8 when taking a picture close its absolutely clear, when i am taking a picture like far its blurry, and i change a new again it same thing what happen when i put a camera before, someone know what is the problem why is not focusing for long shot picture?
par Robert Reyes
what can i do to fix this ?
par Robert Reyes
Found the issue, it back case had a faulty so the camera couldnt move freely. Added a little foam bumper around the camera. And it worked!
par Johan J