Aller au contenu principal

This receiver is Bluetooth Ready, has 110 Watts x 5 Direct Energy Amplification and is iPad / iPhone Certified with supplied cable

26 questions Voir tout

Why does it take time to put out sound after being turned on?

Receiver needs “warm up” time before it starts working

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Réponse la plus utile

@kp52781

that will entirely depend on how long it takes. Not uncommon for things (power FET’s as well as power Amps)having to “warm up” before working. Of course if it is to long you may have an issues with bad solder joints or a bad components. That would warrant a disassembly and checking the components out. minimum requirement for that will be a good multimeter.

Cette réponse est-elle utile ?

Indice 2
Ajouter un commentaire

Ajouter une réponse

Kevin Peters sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 70