Réparez vos affaires Communauté Boutique

Sorti le 25 septembre 2015. Modèle A1688/A1633. La réparation de ce modèle est similaire à celle des versions précédentes et nécessite tournevis et outils pour faire levier. Disponible en GSM et CDMA / 16, 64 ou 128 Go / Argent, Or, Gris sidéral ou Or rosé.

2690 questions Voir tout

Options

Ambient Light Sensor Filter Replacement

Along the top of a black iPhone 6/6S/7/8 (and their plus equivalents) there is a small white sticker under the ambient light sensor that filters light. This only exists on the black screens. I always transfer it over when doing a repair, but the odd time the area where the original is damaged has either caused it to go missing or has torn it causing it useless.

Am I able to get a replacement for this small white piece of (seemingly) paper? Without it, an active phone call placed to the ear does not black out the screen - resulting in buttons being pushed on the screen during a call.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

I think you are getting confused with the ambient light sensor and the proximity sensor.

The proximity sensor is there to detect when the phone is up against your face, putting the screen to sleep.

The ambient light sensor is used to adjust the brightness of the screen in different lighting scenarios. This is the one that has the filter paper. I have never really noticed if this makes a difference if it is there or not on the black screens.

If you think the ambient light sensor is not working correctly due to the filter missing you could just cut a piece of filter paper to pop in there. I have heard of people using a white marker but I am not sure of the results.

Cette réponse est-elle utile ?

Oui Non
Indice 2

1 commentaire:

Ok so if I have an iPhone 8 that the screen isn't locking while on a phone call (after the screen was replaced) would it be more likely that the proximity sensor isn't seated properly? I know the camera flex cable on the 8 is finickier to reset than the ones before it.

par

Ajouter un commentaire

Ajouter une réponse

Bill Shannon sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 595