Aller au contenu principal

Un ordinateur personnel qui se trouve dans un boitier avec ses composants de base, on y branche des périphériques tiers nécessaires à l'exploitation, comme une souris, un clavier et un moniteur.

542 questions Voir tout

Can't access BIOS and skips to windows

First off here are my system specs:

Intel I7 8700k

16GB G.SKILL TridentZ RGB Series DDR4 3000

GTX 970 SSC ATX 2.0 in SLI

Aorus Z390 Ultra Motherboard

Evga 1000w PSU

Samsung Evo 970 1TB M.2 with Windows 10 Pro 64 bit

All of a sudden I do not see my Aorus splash screen anymore. Instead it skips all of that and I goes straight to a desktop log in. Funny this is if I hit delete I can tell it enters the BIOS but I have no video signal to my monitors. PC behaves totally fine otherwise. Get a post beep and all of that. Soo what's going on here?

Overall it seems like a video problem. I’m not getting a video signal until windows loads.


Should I try to reset the bios and pull the CMOS battery? Maybe a bug in the Nvidia Driver?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Réponse la plus utile

Hi @tvandell

Is it a multiple monitor configuration?

you can try this

https://www.thewindowsclub.com/boot-wind...

additional

check for any bios updates for your mainboard.

when in bios, check if PEG graphic has been set to primary.

sometimes there are mainboard setting which can activate fast boot, thus POST clear very fast and boot to windows

Cette réponse est-elle utile ?

Indice 2

1 commentaire:

Hi @tvandell ,

To add to @salmonjapan's answer, try entering BIOS through Win 10 settings

Alternatively disable fast startup Win 10 and check if you get the splash screen and can enter BIOS OK when you restart the desktop

par

Ajouter un commentaire

Ajouter une réponse

Travis A VanDell sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 32

Total : 2,453