Réparez vos affaires Communauté Boutique

La version Wi-Fi de l'iPad Air d'Apple, numéro de modèle A1474. Disponible en gris sidéral ou argent, il emploie le processeur A7 personnalisé et est livré dans des configurations 16, 32, 64 et 128 Go.

299 questions Voir tout

Options

iPad turns on when plugged in but wont charge

I plugged my ipad into the wall when it is on and wont charge but when I turn it off and plug it in it will power on like it detects the charger but wont charge and also not recognized on my computer

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
3 commentaires

I tried 3 chargers 1 of apple 1 after market with certification and 1 with out only 1 that turns on the ipad is non certified 1 ipad dosent respond to any other cable

As far as I can tell it looks good inside the charging port

I can check with 3utools since the computer isn't recognizing the ipad

I sadly don't have USB ammeter to check

I've also tried a battery swap and it still doesn't make a diffrents

par

Most likely the Lightning flex, I change these all the time...

par

same thing happends to me i cant find a fix its been like this for 4 hours

par

Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Hello Jayden. When troubleshooting charging issues, I would do the following (in order):

  • Always try another Lightning cable and charger, preferably Apple original or MFi certified units.
  • The Lightning cable 8-pin connector should be sitting flush with the housing and completely inserted. If it is not, there could be lint/dust/debris inside the port impeding a proper connection. You can clean it out with a toothpick, fine point tweezers or a dental pick. Just be careful not to damage the pins inside the Lightning Port.
  • Change the battery. The battery is the weakest link and certainly for charger related issues. It is also the easiest thing to replace. Use a battery utility, such as coconutBattery (for Mac) or 3uTools (for Windows) to test the battery prior to removal. Anything less than 70% of design capacity will require replacement.
  • If the battery is in good condition, you can use a USB Ammeter to determine if the device is really drawing current when it says it's charging. If it isn't drawing current, then I would change the Lightning/Charge Port. The iPad Air has a well documented history of charging problems. Over time, it loosens within the housing and this causes the flex, at the point where it connects with the port, to crack. This repair requires some micro-soldering.

Cette réponse est-elle utile ?

Oui Non
Indice 5

1 commentaire:

I’m having this issue. What’s cost to replace battery.

par

Ajouter un commentaire

Ajouter une réponse

jayden gumb sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 8

7 derniers jours : 42

30 derniers jours : 176

Total : 4,252