Réparez vos affaires Communauté Boutique

La Samsung Galaxy Tab A 10.1 est connue sous différents modèles aux caractéristiques différentes. Les modèles standards : SM-T580 (WiFi), SM-T585 (3G,4G/LTE et WiFi) sortis en mai 2016 ou les modèles S-Pen : SM-P580 (WiFi), SM-P585 (3G,4G/LTE et WiFi) sortis en septembre 2016. Il s'agit d'une tablette de 10,1 pouces fabriquée par Samsung Electronics et elle constitue leur nouvelle série "A" haut de gamme.

108 questions Voir tout

Options

Board connector for speaker ribbon

Block Image

Alright I am looking to replace both the LCD and Speaker? board connectors.

It's the connector to the left of the LCD one with a thin white ribbon that goes down to the bottom connector just below the battery.

9 pin ribbon with I guess a 0.3 pitch?.

Anyone know where I can get these from? I have looked everywhere and can only find 0.5 pitch which is too big.

I have already taken both broken connectors off.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

David H that connector is Samsung part number 3708-003273 You could always try places like this or this one

What exact model number is your Galaxy Tab A 10.1

Cette réponse est-elle utile ?

Oui Non
Indice 3

6 commentaires:

Thank you for your comment. Is this in regard to the smaller 9 pin connector and not the LCD connector?.

The links you posted are for 20P.

I checked findparts4u and they have 7P but not 9P.

par

At this time all I can tell you is that on the schematic for the T580 the connector is labelled as a 3708-003273. You may have to contact the sellers to verify the pins on that. We still need to know the exact model number for your Galaxy Tab A 10.1 That may or may not make a difference.

par

SM-T580 is on the label with the S/N

par

yes that is the schematic that shows this to be the right connector. Post some pictures of your connector vs a stock photo. I think I know what your concerns are

par

Currently, there is no connector on my board - it was damaged and removed.

I think I was mistaken - this is the home button ribbon right?.

The problem I got is trying to source this actual part - I've tried contacted quite a lot of places but no-one seems to have a 9P 0.4mm pitch FPC bottom contact connector lol

I think it may be possible to solder the ribbon directly to the board, otherwise, I think maybe a new mainboard/motherboard is the only option?

par

Afficher 1 commentaire en plus

Ajouter un commentaire

Ajouter une réponse

David H sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 262