Réparez vos affaires Communauté Boutique

Ensemble complet de tutoriels de réparation consoles de salon Sony, de la PlaySation 1994 à la récente PlayStation 5.

4804 questions Voir tout

Options

How do I fix this?

So I went to clean out my ps4 bro because I assumed it was very very dusty in there. During the process I had to pull out the power supply connector and eventhough I only applied pressure on the right spot the entire connector tore of the motherboard. Can any tell me what I can do to fix this or if it’s even possible to fix?

Block Image

Block Image

Block Image

I could only find guide with a different looking motherboard.

Please help me!!1

Thanks in advance

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

your pads are completely ripped off the mother board. this can be repaired but you will have to have the schematic (ive searched for many and have yet to come across one). once one is obtained, wires will need to be jumped from the closet point of origin to the missing pads (why schematic is needed), then the connector needs to be resoldered on those jumped wires. (going to be difficult) your best bet is to find a repair shop that has either the schematic or experience to get this done. if you find a schematic for your board ( listed on the mother board itself..sch-****) reply back and we can see what can be done.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

Andor van de Linde sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 22