Réparez vos affaires Communauté Boutique

Tutoriels de réparation et de démontage pour les montres connectées conçues par Apple.

980 questions Voir tout

Options

AppleWatch only displays logo intermittently after battery replacement

I replaced the battery on my Apple Watch following the instructions here:

Remplacement de la batterie de l'Apple Watch Series 1

Everything went fine, but when charging it for the first time:

  1. I don’t get the changing snake symbol
  2. The Apple logo will display for <1 sec and then stay off for about a minute.

I don’t think I tore any of the cables or shorted anything.

I am thinking it might be a defective battery. Has anyone had this issue and resolved it by replacing the battery with another new battery?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

My best friend had this issue and sent his series 1 to me for a new battery. Although I’ve tried two new batteries from different suppliers, it still did the same thing. I’m wondering if the software got corrupted or something. I would maybe try another supplier for the battery. I recommend mobile sentrix.

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

@hootonberg @michael_314

I'm dealing with this right now. I've received 3 batteries from iFixit and all have been defective. The voltages have been way too low (2.2V to 2.4V) to accept a charge or boot the watch. It should be closer to 3.7V-3.8V at rest even when fully depleted. I have a thread going here (Apple Watch S1, Still have a boot loop after battery replacement) and over at macrumors (https://forums.macrumors.com/threads/ser...)

par

Ajouter un commentaire

Ajouter une réponse

Michael Gagne sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 8

30 derniers jours : 18

Total : 731