Aller au contenu principal

The DeWalt DWD112 is a high performance drill for heavy duty applications.

4 questions Voir tout

My drill a DWD110K type 2 similar to the 112 will not run when the tri

Thanks for answering my last question but I want to be sure of the repair and parts but could the fact that my drill won’t start when pressing the trigger be the trigger as well as the brushes? Is there a test to determine if it’s the brushes or trigger or both?

joe

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Réponse la plus utile

@jcfal  ''

Off-and-On Use

Switches-

Wearing power switches will cause off-and-on use as their connections wear down, sometimes requiring several pulls of the trigger before the tool starts up.

Brushes-

Wearing or damaged brushes can cause a similar off-and-on use problem, but this is usually because wear, damage, or a "burr" formation is preventing the carbon brush from correctly contacting the armature's commutator.

If your brushes are pushed firmly against the motor armature and have no burrs and the contact wires are okay it is unlikely that the brushes that have failed.

Check on here for more

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

Ajouter une réponse

Joe falconio sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 78