Réparez vos affaires Communauté Boutique

Sorti le 16 septembre 2016. Modèle 1660, 1778. Disponible en GSM ou CDMA / 32, 128 ou 256 Go / Or rosé, or, argent, noir et noir de jais.

2266 questions Voir tout

Options

Home button not working after screen change

I changed the screen on my phone. The original home button works fine with the original screen. It does not work with replacement. When i power it on it does not pop the unable to activate home button etc warning at all. in settings i can go into fingerprint section and select add print, but it does not register. home button does not work. Is it the home button cable on the replacement screen?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

The home button flex cable from the screen to the logic board will have a small tear. This usually happens at the 90 degree bend and might be hard to see without magnification. Your only solution is to replace the screen.

Cette réponse est-elle utile ?

Oui Non
Indice 1

1 commentaire:

it does seem as if it is the screen, as i stated the button is fine, so is the phone, as it works fine with the original broken screen.

par

Ajouter un commentaire
Réponse la plus utile

Options

I have had this issue in the past. The home button on the iphone 7&8 are not a actual “button”, they are just touch sensors. The only real way to keep your home button working is to switch over the original when doing a screen replacement, if not you will loose all functionality of the button. I replaced a screen on a 7 and switched over the home button, but the button didn’t work at all. I switched over the metal heat shield that has the original home button flex cable into the new screen and it started working fine. I also made sure that the bracket and the button itself were all aligned and tightened. Hope this helps, good luck!

Cette réponse est-elle utile ?

Oui Non
Indice 1

2 commentaires:

Also you may have damaged the extension flex cable and the flex cable on the home button. Check for any small tears, they are extremely fragile.

par

As i stated, the button works fine with the original broken screen. it is not possible to use the home button cable from the old screen as far as i know.

par

Ajouter un commentaire

Ajouter une réponse

sam caspian sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 12

Total : 99