Aller au contenu principal

Réparer et entretenir les haut-parleurs conçus pour être raccordés à un ordinateur.

20 questions Voir tout

Tronsmart Element Force Soundpulse not opening/not working

Hello.

I ‘ve bought bluetooth speaker Tronsmart Element Force Soundpulse, before 3 months ago. Suddenly i press the power on button, blue led light flashing, its opening (while i press the button), but when i release the power button the speaker shut down.

I try reset by pressing/hold power button + EQ, power button + M(memory button), power button + start/pause nothing happens.

Any ideas?

thank you

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 2

1 commentaire:

Tronsmart power button rubber cover dislodged and be fixed back.

par

Ajouter un commentaire

5 Réponses

@techiteasy sounds like a power board issue. Problem with that is the schematics are not available. you would have to do a teardown and post pictures of the boards trying to troubleshoot it. Since this is a new speaker I would strongly suggest that you contact either the Vendor or the manufacturer and have them fix this under warranty.

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

Hello @oldturkey03 and thank you for your reply!

I send them email both of them and they told that yes i under warranty but it would take about 2 months (send-repair-send me back). So i decided to keep it and try to fix.

I try to teardown as you told me and post some photos sure!

I don’t know too much things about electrically You think that it’s easy to fix my own?

par

@techiteasy that'll depend on what is wrong with it and which component has failed. It could be straight forward or really complicated without having a valid schematic.

par

Ajouter un commentaire

@oldturkey03

This is the first floor i think!

Is that ok or going down further??

Block Image
Block Image

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

This looks like the board where the power connects to. Correct? can you find the wiring from the power switch anywhere since we need to find the wiring from the switch to the power on circuit. Pictures look good but eventually need to remove the foam etc. on the boards so we can see more of that. you do have a multimeter for testing purposes?

par

unfortunately don’t have any equipment. I think that without the correct stuff i have to go to a service point to fix it.

par

Ajouter un commentaire

And here is a video with the problem.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Hi. Actually You should double press the power button. and hold it for 5-8 secs :) We have the same problem :)

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire
Hello.
I would like to ask you for a favor. Do you still have the original of this photo? I would need to know what kind of electronic component it is (the one in the blue circle). When I enlarge this photo, I can't read the description.
Thank you very much, Vaclav
[image|3114681]

Update (10/28/23)

I didn't see the picture. I am sending it again.

Block Image

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

PanK sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 21

Total : 2,494