Rep: 1
2
1
Ive installed a new harddrive and optical drive I bought from ifixit. Install was easy due to the detailed guides.
Now my problem:
Ive inserted my osx disc, restarted and held down option. The screen appears white or a slight grey. The mouse cursor appears. But boot options do not.
If I reboot and do not hold any keys down, I get a blinking folder with a question mark.
What should I do here?
Thanks!
Cette question est-elle utile ?
Rep: 685,3k
3,4k
1,1k
2,6k
Usually when repairing or upgrading a computer it's a good idea to just do one thing at a time and make sure it works before proceeding to the next because if there is a problem, you don't know where to look. I don't know why you are replacing the drives or what drives you got. Usually you would replace the hard drive first, format the drive and install a system. Then go for the optical drive.
Cette réponse est-elle utile ?
Optical drive was dead, then the hardrive went a few months later. So to add a new hard drive that comes unformatted Id need a working optical no? :)
hey @mayer any ideas or tips?
I'd go with an external DVD drive from LaCie like this one: http://www.lacie.com/us/products/range.h...
very good idea
Ok, So I got my hands on an external optical drive. I inserted the recovery disk, held down option key and rebooted.
While holding down the option key I get the white screen again and mouse cursor appears and thats it.
On a side note, the 4 lights that appear on the board are all lit up.
What next steps should I take?
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 0
Total : 726
