Aller au contenu principal

Model M6497 or A1005 / 500, 600, 700, 800, or 900 MHz G3 processor

117 questions Voir tout

Will not boot form any drive

Just got this G3. I knew that it might have hard drive issues, so I plugged in my external firewire, and started holding down my option key. I selected the external drive, but when I clicked the arrow, the screen just blinked and nothing happened. The external drive boots other similar macs just fine, so I assume it is not the drive. Also tried several other install CDs, but again the machine will just not boot.

I connected to this mac in target mode from another mac and reformatted the HD and installed 10.3, but when I restarted, I just got a flashing question mark. I read somewhere that it could be corrupt firmware. I am not sure how to fix that. Any ideas would be appreciated.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice -1
1 commentaire

Please tell me about the machine you are installing from and if your 10.3 is a retail version.

par

Ajouter un commentaire

1 Réponse

Solution retenue

Thanks for your interest. I just resolved the issue. Turns out that this G3 500 Mhz only had 64MB of RAM onboard and was not enough to boot into OS X. I added additional memory and the problem was solved.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

studio58 sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 7

Total : 614