Réparez vos affaires Communauté Boutique

Tutoriels de support pour des machines deux-en-un, qui intègrent le lavage et le séchage dans la même unité.

141 questions Voir tout

Options

Stopped on 'rinse' with buzzing sound, why

kenmore 417.98702891 youtube suggested it was the coupler, but i can’t even find it. I pulled out the motor, but didn’t see it or any sign of it.

machine is 20 years old. I was running a small load, drum was filled to small level. I took all items out, let it sit for a long time, still didn’t run.

I can’t afford to replace it, can’t even really afford to fix it, certainly can’t afford to pay someone to come out and not be able to fix it…

the dial is directly pointing to rinse.

Update (12/25/2020)

Block Image

Block Image

Block Image

Block Image

Update (12/26/2020)

Block Image

washer pump

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Hi @zinniab ,

Just verifying that the washer fills OK, agitates OK but when it comes to the rinse part of the cycle that it doesn’t drain but just buzzes, is this correct?

If so it sounds like there may be a problem with the drain pump - part #43 Tub, basket and agitator Diagram

Check that there is nothing jamming the pump impeller preventing it from operating correctly.

Cette réponse est-elle utile ?

Oui Non
Indice 0

19 commentaires:

The dial is on the "regular" setting. Has numbers 15,12,8,4......then has a dot at "rinse" the dial is stopped exactly on Rinse. I was in the next room when it was running, I assume it ran normally until that point. Looked to be filled a typical amount for a small load......The pump looks easy enough to get off,...just waiting for the dirty towels to dry on my heaters to help catch the water. Previous load ran fine. The smallest thing in this load was a couple wash clothes, nothing seems to be missing....nothing had pockets that something could have been left in.

par

i responded, but the bot said it was spam…even though clearly was not….have to wait for it to be reviewed…it will just be removed again if I try to re post.

par

I assume I am supposed to remove the nuts to take the pump off, they don't seem to be coming off.....I wish this site allowed pics.

par

my neighbor has my good socket wrench...i have to pick that up later to try....i can't see in the pump without taking it off..or dis assembling it which I really don't want to do.

par

@zinniab

Here's how to add images to your QUESTION on ifixit

Ajout d'images à une question existante

Try applying some WD-40 to the nuts and leaving it for 12-24hrs as this should loosen them. After 20+years no doubt they are frozen (rusted?) in position.

You may have no choice. If the pump is not blocked it may be faulty and have to be replaced anyway and it has to come out.

par

Voir 14 commentaires en plus

Ajouter un commentaire

Ajouter une réponse

zinna b sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 28

Total : 624