Rep: 9
2
3
I replaced the lightning connector on my iPhone 6s Plus yesterday and reassembled it only to realize I have no sound from the loudspeaker. I can hear through the headphone jack. The microphone works as people can hear me when I call them but I can’t hear them on the loudspeaker. Any suggestions?
Cette question est-elle utile ?
Rep: 11,5k
7
5
1
Make sure the new connector is firmly connected to the board and that there aren’t any bent or damaged pins or tears in the new assembly. If that’s not the issue check to make sure the speaker can make contact with the lightning connector. There should be a couple pins that make contact with it. If that doesn’t work then you may have a defective part on your hands.
Cette réponse est-elle utile ?
how would I check that the connector is firmly connected to the board? How do I determine if the speaker is making contact with the lightning connector? An image of the proper connections would be invaluable.
@Robin there's a couple ways you can check those. You can disconnect and reconnect the lightning port and give it a few firm presses on each end to make sure it clicks into place. But before you do just check the connector and make sure there aren't any bent or damaged pins. Once you've done that, take the loud speaker out and make sure the pins on the underside aren't missing or damaged or that there isn't anything in the way.
thank you for your help.
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 0
Total : 80
