D85 Botvac is working fine, but now has a loud knocking/clunking sound when maneuvering. It is intermittent. I service clean the brush and bearings almost every run. I have tightened up the wheel hubs, so that is not the issue. At a loss.
Cette question est-elle utile ?
So the clunking turned out to be the brush motor becoming loose from the brush gearbox.
I removed the gearbox from the D85 and put blue thread-locker on the motor mount screws. I also added a thin nylon washer between the main transmission gear and the gearbox.
Everything is perfecto now.
Cette réponse est-elle utile ?
where is the gear box
Dernières 24 heures : 1
7 derniers jours : 2
30 derniers jours : 4
Total : 204
