The port has been like this since I purchased it, but the pins were fine for about a couple of months before one pin bent, so I bent it back. Now it’s to the point where it won’t charge anymore.
Cette question est-elle utile ?
Rep: 2,7k
6
3
2
really for bent pins in a charger its either you carefully try to bend the pins back into position
or
replace the connector.
these are pretty decently documented so you should be able to scrounge a new connector. but there isnt much else that can be done.
good luck!
Cette réponse est-elle utile ?
Dernières 24 heures : 1
7 derniers jours : 2
30 derniers jours : 11
Total : 58
