Réparez vos affaires Communauté Boutique

Mis sur le marché le 21 septembre 2018. Modèles A1920, A2097, A2098, A2100. Disponible avec GSM ou CDMA / eSIM ou dual-sim / 64, 256 ou 512 Go / Argent, Or ou Gris sidéral. (Se prononce "iPhone 10 S".)

398 questions Voir tout

Options

Not responding to touch after screen replacement

I replaced an iPhone XS screen because it was cracked and it was ghost touching. Also replaced the battery because it wasn’t charging. The phone charges now so the battery replacement seems to be a success, but I’m having issues with the display. It turns on fine and the picture looks fine but it doesn’t respond to touch whatsoever. I have checked the connection multiple times and they all are connected properly but nothing I do is working. I have tried force resetting as well and they didn’t do anything.


I’ve replaced iPhone screens before (including an IPhone XS) but I’m still an amateur so I have no idea what else could possibly be wrong with it.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 2
2 commentaires

Thanks for your answers! I emailed the company and they said they’d replace it. I’ll update if the new one works

par

This happened to me today. Replaced an iPhone XS with a new screen from iFixit. Apple told me to do a hard reset. That fixed the problem. I think this is common and hopefully iFixit will update their repair instructions.

par

Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

You will need to rule out the screen as it may be faulty. If the screen is not the problem it will be a logic board problem.

 The touch power and data lines are on the bottom layer of the board and are connected to the top half of the board through solder balls. If the phone has been dropped in the past it could have caused one or more solder balls to crack.

To diagnose your problem once you have determined it’s not the screen would be to take measurements of the connector pins with a multimeter and check against the board view schematics.

Cette réponse est-elle utile ?

Oui Non
Indice 1

1 commentaire:

thisneeds pix

par

Ajouter un commentaire

Options

Brianna.

There is good chance that the screen is broken or in general is cheap.

Cette réponse est-elle utile ?

Oui Non
Indice -1
Ajouter un commentaire

Ajouter une réponse

Brianna Valenzuela sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 26

30 derniers jours : 72

Total : 1,493