Missing Pads Charge Port

Question

iPad 6

Sixième génération de l'iPad, sortie en mars 2018. Disponible en Wi-Fi et LTE avec des options de stockage de 32 et 128 Go. Doté d'un écran Retina de 9,7 pouces et d'une puce A10 Fusion de 64 bits.

222 questions Voir tout

mmejia04 @mmejia04

Rep: 13

2

Publié: 29 juil. 2021

Options

Missing Pads Charge Port

Hello,

I am missing charge port pads for pins 5, 12, 14, and 20 for an iPad 6th Generation WIFI. Can some help me identify any test points on board where I can jump these to the connector?

Thanks in advance!

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice 1

5 commentaires

you need to mark the pads in the photo or picture - the numbers of pins and lines are not marked on any of the available diagrams (let's at least set the starting point and the direction of counting - so as not to make a stupid mistake). At the same time, I confirm - such a check is possible

30 juil. 2021 par bert.harmidomski

I am missing the ones highlighted in light blue.

30 juil. 2021 par mmejia04

wait...

31 juil. 2021 par bert.harmidomski

mmejia04 post a picture of your actual board as well. That way we can actually see the placement of the components and follow the traces as per schematic....

31 juil. 2021 par oldturkey03

I posted a new picture, the pads inside the red boxes are the ones needed. The other pads are either connected to ground or have a second connection to the same point.

31 juil. 2021 par mmejia04

Ajouter un commentaire

1 Réponse

you need to mark the pads in the photo or picture - the numbers of pins and lines are not marked on any of the available diagrams (let's at least set the starting point and the direction of counting - so as not to make a stupid mistake). At the same time, I confirm - such a check is possible — bert.harmidomski
mmejia04 post a picture of your actual board as well. That way we can actually see the placement of the components and follow the traces as per schematic.... — oldturkey03
I posted a new picture, the pads inside the red boxes are the ones needed. The other pads are either connected to ground or have a second connection to the same point. — mmejia04