Xbox 360 E Winchester Motherboard Need resistance of R3D31 to R3D29
1.First time my console showing red ring of death.When i press power button it turn on fan spin loud and then shut down.
2.Then seraching over internet i found that problem is overheating and you have to remove temp sensor resistors so i removed 1 resistor from the board i.e. R3D31 and it worked my console running fine
3.But aftrer few days it starts shutting down again so i removed all six resistors from the board.
4.But later i found that one capacitor is not working so i replaced that capacitor
5.Now my console is booting with red light and running continuously but no display.
I removed 6 resistors from the board picture attached.
Now i think that i need to reattach these six resistors to the board i need value and type of these resistors.
Cette question est-elle utile ?
munish kumar post some good pictures of your motherboard pointing out which components you took off. Let's see what this all looks like Ajout d'images à une question existante
par oldturkey03
@oldturkey03 updated please help me
par munish kumar