Réparez vos affaires Communauté Boutique

Deuxième génération de l'iPhone. Modèle A1241 / capacité de 8 ou 16 Go / coque arrière noire ou blanche. La réparation est plus simple que pour l'iPhone de première génération et nécessite des tournevis, des outils pour faire levier et une ventouse.

1158 questions Voir tout

Options

How To Program iPhone 3G LCD/ LCD Datasheet

This question also appears on the "Discuss" board.

I like working with microcontrollers such as those in the Arduino platform. Now that I've replaced the entire display assembly of an iPhone 3G with a IF137-008-1, I'm left with a perfectly good LCD unit that the customer won't want. Is there a datasheet for the LCD and perhaps even a development type PCB that I can plug it into and play with?

For example can I set this up so an Arduino Mega can send a jpg photo to the LCD with some nice caption text?

Thanks

Bob

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 3
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

from some teardown reports I have read, I heard that there are maybe 3 likely manufacturers of the LCD module:

- Toshiba Mobile Display

- Sharp

- Samsung

However I'm not sure if it's easy to find the datasheets for the specific panel, but you may be able to do some digging knowing the makers. I don't know if the manufacturer's part number appears on the panel.

on the other hand, I also read that the iPhone 3G uses a National Semiconductor chip to interface to the LCD display, the LM2512AA Mobile Pixel Link display interface

http://www.national.com/pf/LM/LM2512A.ht...

perhaps you can get a clue from it's data sheet and go from there.

have fun and good luck

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Ajouter une réponse

cochranb sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 6

Total : 12,815