Réparez vos affaires Communauté Boutique

L'Apple iPhone 5s fut annoncé le 10 septembre 2013. La réparation de ce modèle est très similaire aux modèles précédents et requiert des tournevis ainsi que des outils pour faire levier. Disponible en version GSM ou CDMA, 16/32/64 Go de stockage et en argent, doré ou gris sidéral.

32 questions Voir tout

Options

Bluetooth and Wifi Antenna Replacement Guide

Thanks for all the ifixit guides and community support. Regarding the Bluetooth and Wifi Antenna Replacement Guide, I just replaced the battery using a different guide on YT but broke the bluetooth and wi-fi antenna. The new battery works but I am reluctant to remove it because it was that process that caused the damage. Albeit more difficult, but is it still possible to replace the bluetooth and wi-fi antenna without removing the battery?

Regards.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

If you follow carefully the guide you'll notice the battery doesn't need to be removed, but you'll need to remove the logic board since the antenna connector in on the bottom side of it. See step 33 of the guide for a detailed view:

Remplacement de l'antenne Wi-Fi/Bluetooth de l'iPhone 5s

Cette réponse est-elle utile ?

Oui Non
Indice 3

3 commentaires:

Thanks for your answer. What are your thoughts on when it is time to remove the existing antenna, is there enough space to use the spudger while the battery is still there?

Anyway I'll order the ifixit kit and give it a go and update sometime if it works. My only other option is to pay nearly £60 including delivery charges to get a repair store (other than extortionate Apple) to do it. Thanks.

par

@Adam H No need to worry, it's an easy enough task, just warm up a bit the iphone shell to soften the glue that keeps the antenna in place. A hair dryer or a warm heater will be sufficient. The phone should just be warm to the touch, no need to make it hot. A spudger will be all you'll need after you remove the logic board and the vibrating engine.

par

@arbaman That's great, thanks a lot for your help.

par

Ajouter un commentaire

Ajouter une réponse

Adam H sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 170