A1932, Backlight not working, Image & caps lock ok

Question

MacBook Air 13” avec écran Retina fin 2018

Informations et tutoriels de réparation pour la refonte tant attendu du populaire MacBook Air, doté de processeurs Core i5 d'Intel, d'un écran Retina mis à jour et de nombreux autres changements et mises à jour qui a été publié le 7 novembre 2018.

147 questions Voir tout

wordi pressi @wordipressi

Rep: 13

1

Publié: 10 mars 2022

Options

A1932, Backlight not working, Image & caps lock ok

Macbook Air 13” A1932.

As I was using my macbook it made one “click” sound and the backlight went dark. I can see the apple logo when turning on if I shine a flashlight on it. Caps lock is lighting up and so does the keyboard. I have tried the resetting stuff with the multiple button presses, but no change. I opened the backplate to look at the logic board and did not see any obvious damage, in fact it looks new since I only used it like 4 times.

Is there anything else I can check on this model?

I have read about a backlight fuse, but I don’t know how it looks or where it is located, could somebody guide me to it?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice 1

1 commentaire

To be clear you are shining the flashlight through the lids Apple logo and can see your desktop? Or if you are in a darkened room do you see a slight glow from the system.

11 mars 2022 par Dan

Ajouter un commentaire

2 Réponses

To be clear you are shining the flashlight through the lids Apple logo and can see your desktop? Or if you are in a darkened room do you see a slight glow from the system. — Dan

oldturkey03 @oldturkey03 Rep: 782,1k 1,1k 893 2,3k · Answer 1 · 2022-09-08T19:39:55-07:00

Réponse la plus utile

oldturkey03 @oldturkey03

Rep: 782,1k

1,1k

893

2,3k

Publié: 8 sept. 2022

Options

wordi pressi the backlight fuse is reference designator F8400. It is a 32V 3A fuse in a 0603 package. Location on your logicboard as shown. Measure continuity with a multimeter or your can measure for proper voltage with the board power applied.

If it is not the fuse,you will have to check deeper for the cause. Use the schematic for the backlight as provided. Do not forget to check your display connector since a lot of short circuit happen right there. Post some images of your logicboard (both sides) with your QUESTION so we can see what you see.