Rep: 13
1
It’s a model # M5011 and when turning on the computer gives a normal boot tone and the hard drive is working but the screen is white with white lines. All capacitors on the motherboard were replaced and cleaned. It came with the ROM and all RAM slots filled.
Update: I have replaced both the Q1(2N3904) ic and U1(74LS38) ic no changes occurred.
Cette question est-elle utile ?
Rep: 36,9k
150
91
50
The fact that you're getting a chime (and not a "chime of death") should indicate that the ROM and RAM chips are okay, but you could remove some of the RAM to rule out the possibility of a bad stick that isn't getting caught during the startup check.
Display issues on these machines can usually be attributed to the analog board, how to the capacitors, connections, and other chips look on that?
Cette réponse est-elle utile ?
The RAM strips are using tin connectors. Clean those since corrosion can cause all kinds of errors.
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 4
Total : 447
2 commentaires
The battery on the logic board was replaced, correct?
par Andrew S
yes the battery was replaced before the caps were.
par Codedream