Fmu and main board light
Why my fmu led lights on board is not power on and the main led light is solid purple?
Cette question est-elle utile ?
Indice
2
748537
1 Réponse
Réponse la plus utile
Rep: 2,5k
40
7
59
According to this troubleshooting document
- [Solid Purple] Failsafe Mode: This mode will activate whenever vehicle encounters an issue during flight, such as losing manual control, a critically low battery, or an internal error. During failsafe mode, vehicle will attempt to return to its takeoff location, or may simply descend where it currently is.
Did you check for preflight errors?
Cette réponse est-elle utile ?
Indice
1
ok! how i solve this problem because the pixhawk dosen't do nothink,no sound on buzzer no connection on pc.
@Yiannis Tsounis I would refer to this article
https://discuss.px4.io/t/solid-purple-li...
Try formatting the SD card and re-flashing the firmware
@yiannistsounis hi, did you solve your problem already?
budiono55 unfortunately i can't find a solution for this problem
