Réparez vos affaires Communauté Boutique

The first version of the Huawei P Smart Model.

6 questions Voir tout

Options

Disassemble p smart2018 back plate

Hello, I was searching on my house for something and I found a HUAWEI Psmart 2018 so I thought that I was going to sell it but I saw that the Back plate was a “bit destroyed ”.

I decided that I wanted do fix it but when I was ready to replace it I saw that the fingerprint reader was completely attached to the back of the phone and I am now asking if someone knows what to do, as I don’t think that it is possible to replace that.

Thanks

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

Manuel Olivera sure you can remove/replace it. Use something like these instructions to get it done. While you repair your phone, make some guides for us. That way they'll be there for the next person that has the same issues. https://www.ifixit.com/Guide/new it's not very difficult :-)

Cette réponse est-elle utile ?

Oui Non
Indice 0

2 commentaires:

I, thank you for helping me

I think this guide will certainly be helpful, but on their it says to use a hairdryer for 15seconds onto the fingerprint reader

isn’t that dangerous to it

I am a bit concerned with it

If it goes well I will try to make a detailed guide to this repair

Thanks again

par

@perkeo_roger it will be okay for as long as you keep your time to a minimum and move the hair dryer around. That keeps spreading the heat evenly. You don't want to just blast it on there.

par

Ajouter un commentaire

Ajouter une réponse

Manuel Oliveira sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 24

Total : 449