Réparez vos affaires Communauté Boutique

3 questions Voir tout

Options

What would be causing me to only see an unilluminated image on my d

Hi I have an ux533fd. I purchased it with left hinge seperation from screen. screen worked upon recipt. Recently I cant see desktop image in display unless i shine a light on the screen, then its all there, also is there on 2nd display. Machine has been factory reset as well. So my question is, what would cause your display not to be backlit but still show hi res image?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

A Bee failed backlight strips would be might first suspect. Since you were dealing with a bad hinge, it is possible that this is a wiring issue. Of course, you cannot rule out problems with the backlight driver or even a blown backlight fuse. WE would need to know the exact motherboard number for your laptop so that we could try to get you more information about the fuse, the connector etc. ******

Update (12/07/2022)

@A Bee it's one of those depends. We'll have to see what you got going on there. It is possible that it does or it may be part of the rest of the wiring. It should become obvious/visible if you remove the bottom cover of your laptop and we can see what all of that looks like. You can always post images with your QUESTION (Questions and Answers only, not comments) so we can see what you see. Ajout d'images à une question existante

Cette réponse est-elle utile ?

Oui Non
Indice 2

1 commentaire:

ill find the board number and post. i didnt know the backlight had a driver. does the backlight have seperate wiring from the lcd?

par

Ajouter un commentaire

Ajouter une réponse

A Bee sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 40