Réparez vos affaires Communauté Boutique

Guides and repair information for Kenwood mixers.

99 questions Voir tout

Options

Mixer model kmx50 accelerate and slow down speed control no reaction

So far have replaced with new electrical module where all components are fitted together like speed control dial and capacitors and problem not solved, mixer it self have only three electrical components the main module and speed sensor and the corpse open sensor, there should be easy fix otherwise the motor is defective but is running continuesly at low speed so difficult to say is defective.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

SOLVED UPDATE

Problem was the speed control sensor located above on the motor with three cables, never thought such tiny part make the stand mixer defective. This sensor is installed on more kmix models so if you have such issue then you know where to look.

Cette réponse est-elle utile ?

Oui Non
Indice 2

1 commentaire:

My mixer same thing, speeds up and then slows to 30%. The sensor between the fan and motor was rubbing on the magnet and wore away the hall effect sensor. I got a replacement item KW710626 about £10 and that fixed the problem. I fixed sensor board in place so sensor no longer rubs.

The hall effect sensor had marking 44e 106 if you want to find just the part to replace (3 legged small square device)

par

Ajouter un commentaire

Ajouter une réponse

George sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 32

Total : 404