When I push the start button, nothing happens (most of the time).

Question

iBook G3 14"

Model M8413 or A1007 / 600, 700, 800, or 900 MHz G3 processor

36 questions Voir tout

johnaron @johnaron

Rep: 1

Publié: 13 janv. 2012

Options

When I push the start button, nothing happens (most of the time).

The symptoms: Start-up fails. But a few times I'd get the start-up chime and then nothing. Once or twice I got to log in and then nothing. I noticed, before it died, that while typing and the screen wiggled, the screen contents also wiggled in sync. I took guidance from iFixit, using the "get the hard drive out" series. I needed to retrieve my photo library. Yah, Yah, I know, "why didn't you have it backed up?" I just didn't. I bought a DC-in assembly from you guys and in the meantime got a Universal Drive Adapter (Newertech) from OWC to get the stuff off my drive.

Yesterday I got everything back together, but got the same symptoms. 5 or 6 tries, maybe 1 or 2 chimes. This morning I tried again, got logged in, then nothing.

Does any of this ring any bells?

Thanks in advance.... J Aronson

I tried reseating my RAM to no avail, but thanks

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice -1

11 commentaires

have you tried reseating your ram?

13 janv. 2012 par pollytintop

I don't know how to answer responders

14 janv. 2012 par johnaron

OK, now I get it. pollyintop, tx. No luck with the reseat.

14 janv. 2012 par johnaron

pollyintop. tx...where to find the forums you mentioned?

14 janv. 2012 par johnaron

lemerise... tx....is it possible to fix w/o $280 logic board?

14 janv. 2012 par johnaron

Voir 6 commentaires en plus

Ajouter un commentaire

2 Réponses

Solution retenue

lemerise @lemerise

Rep: 37,6k

315

66

72

Publié: 14 janv. 2012

Options

Looks like a failing graphic chip so the logic board would have to be replaced. No problem with your data, just remove the hard disk and put it in an IDE external enclosure or in another PPC machine.

Cette réponse est-elle utile ?

Oui Non

Indice 5

2 commentaires:

there are a couple of forums with "fixes" for this issue including making a shim from foil to push the graphic's chip onto the board better. I also had this kind of issue with a bad start and it was the charger at fault (no screen wobbles though)

14 janv. 2012 par pollytintop

@pollytintop : the problem is << I noticed, before it died, that while typing and the screen wiggled, the screen contents also wiggled in sync>> clearly a symptom of a desoldered graphic chip on theses G3s associated with the freezing and difficulty to boot the system.

14 janv. 2012 par lemerise

Ajouter un commentaire

lemerise... tx....is it possible to fix w/o $280 logic board? — johnaron
there are a couple of forums with "fixes" for this issue including making a shim from foil to push the graphic's chip onto the board better. I also had this kind of issue with a bad start and it was the charger at fault (no screen wobbles though) — pollytintop
@pollytintop : the problem is << I noticed, before it died, that while typing and the screen wiggled, the screen contents also wiggled in sync>> clearly a symptom of a desoldered graphic chip on theses G3s associated with the freezing and difficulty to boot the system. — lemerise