Réparez vos affaires Communauté Boutique

Repair and disassembly information for amplifiers in home audio systems.

117 questions Voir tout

Options

Power Up Viper22A IC With 9V Battery?

Hey there! This may be a stupid question, but can I power up a Viper22A IC in circuit with a 9V battery? I have a powered speaker that keeps blowing fuses so I can’t take any voltage readings from the Viper22A. I noticed on the spec sheet it says Vdd can be anywhere between 9-38V. Here is the data sheet for the Viper22A. Thank you!

https://www.digikey.com/htmldatasheets/p...

Here is a schematic and some pictures.

Block Image

Block Image

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

I don't see any point in trying to power the VIPer22A externally, since it is a Switch Mode Power Supply chip, which means it controls the power supply, not the amplifier.

What is the reading of the fuse that keeps blowing? Have you had this speaker for a while, or is it new to you? What is the mains voltage (power coming from the wall outlets) in your country?

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

Hi Andy and thanks so much for replying to my question! I should have mentioned that the powered speaker has blown the 2 switching mosfets in the SMPS, so I’m thinking there is a problem in the SMPS. The fuse is a T 6.3V H 250V. The powered speaker is 10 years old. I’m in the US so mains is 110V, 60 cycle.

par

Ajouter un commentaire

Ajouter une réponse

Bill Garvin sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 7

Total : 46