Rep: 4
3
1
I recently took apart my DS3 and put it back together, ever since then I have received 4 flashing red lights everytime i plug it in. It does not give off any lights when unplugged
Edit: I have used the reset button and switched batteries.
Cette question est-elle utile ?
Rep: 551
9
8
13
Sounds like the board isn't connected to the battery properly and isn't charging. Open it up and check all the connections.
Cette réponse est-elle utile ?
Hey and thanks for answering! Shouldn't the controller work with unplugged battery whilst connected with usb?
@thimstr I don't think so. Usb is purely for charging and not actual power.
@strongbow Well, I switched with a brand new battery yesterday and I got the exact same results, sorry for not providing this info firsthand.
@thimstr obviously the battery is connected. Have you tested voltage to the battery connector with a multimeter with the cable connected? Check the voltage on the new battery too.
@strongbow Thanks for the suggestion, I would have to bring home a multimeter from work, is there anything else I could check in the meanwhile?
Dernières 24 heures : 2
7 derniers jours : 18
30 derniers jours : 52
Total : 508
