Rep: 11
1
I bought a new Sandisk 64 GB Micro SD card for my camera and the camera outright refuses to format it. I will click yes and it still won’t format. I’ve tried another Micro SD card and it works just fine. Anyone else have the same problem?
Cette question est-elle utile ?
Rep: 463,4k
11
374
1,5k
Hi @bruhflag
The manual says up to 32GB SDHC and 64GB/128GB SDXC.
(click on image)
The type should be displayed on the card.
Looking online at images of Sandisk cards the 32GB are marked SDHC and the 64GB are marked SDXC. (see image above for SD card type logo)
I don't think that there are any SDHC cards above 32GB anyway.
Cette réponse est-elle utile ?
Dernières 24 heures : 4
7 derniers jours : 27
30 derniers jours : 160
Total : 1,622
8 commentaires
Hi @bruhflag,
Have you tried formatting the SD Card in a computer?
It may be a faulty card.
par jayeff
Heya @jayeff !
I’ve tried that just now, and it isn’t working. My card reads fine on my computer, just not the camera.
par BruhFlag
@bruhflag
By "reads fine" did you try "writing" to the card in the computer?
Formatting involves writing to the card and then reading the result.
Try formatting it in a computer and then copying some files to it.
If no good try cleaning the gold contacts on the card with a pencil eraser
par jayeff
@jayeff I just loaded some JPG files on it and it reads and writes perfectly well.
I’ve just tried cleaning the contacts with a pencil eraser, no luck either.
par BruhFlag
@bruhflag
Don't know.
If it is only a problem with that one card and not other cards as well then there's a compatibility problem between the camera and that one card.
Were the other cards also 64GB?
The manual says that it can handle up to 128GB cards but maybe it can't for some reason especially if the other cards weren't 64GB or higher either so that you know it can
par jayeff
Voir 3 commentaires en plus